Sheet steel 12 mm
(Thin sheet DC01, warm rolled)
Dimensions: selectable on the right up to 3000 x 1500 mm (10 mm = 1 cm)
Thickness: 12 mm (fine sheet)
Surface: Smooth, oiled
Alloy: DC01, magnetic
Weight per m² for thickness 12 mm: 96 kg
Order thin sheet metal / sheet steel 12 mm (without scale) inexpensively from a specialist
Sheet steel with a thickness of 12 mm is immediately ready for use in the industrial or craft sector. The thin sheet metal is ideal for repair work on car bodies as a weld-in sheet metal or automotive sheet metal, as the thin sheet metal can be easily welded using all processes and is of course magnetic.
DC01 is a relatively soft steel and is ideal for forming and deep drawing. Thin sheet metal panels or blanks made from 10 mm sheet steel of this quality are easy to process. The bare, oiled surface requires no preparation for welding. Sheet steel with a thickness of 12 mm not only has countless applications in the automotive industry, but also, for example:
in mechanical engineering
in shipbuilding
in vehicle construction
in agriculture
architecture
in the pipe and profile industry
in the enamelling, barrel and construction industries
in sanitary supplies
for building housings, cabinets and much more
Thin sheet / sheet steel 3 mm – freely configure dimensions, check price and order directly online
Order your 3 mm steel sheet made to measure here online and without much effort. Enter the desired dimensions of the sheet metal cut into the configurator and find out immediately how much your sheet metal costs. You can purchase conveniently at the touch of a button. In Metallparadies, in addition to the 3 mm sheet steel, you can of course also order all other common thicknesses as cuts in any quantities.
You will receive our 3 mm steel sheet cold-rolled and oiled. Other available sheet thicknesses in the area of thin sheets are 1.0 mm, 1.25 mm, 1.5 mm and 2.0 mm.
We offer larger thicknesses from 3.0 mm thick (heavy plates) in the alloy S235JR. S235JR is a typical base steel for mechanical engineering or steel construction. These sheets are hot rolled, therefore with scale on the surface. Both types of sheet metal quickly develop rust when exposed to air. To protect against corrosion, a coating in the form of varnishes, waxes, oils, powder coatings or electroplating processes is required.
On request: drill holes according to sketch
We can drill up to 20 holes in your configured workpiece*.
Please select the number of holes in the menu. After completing the purchase, you will automatically receive an email from our merchandise management requesting a sketch (max. after 30 minutes). In response to the email, simply send us a sketch from which we can identify the position of the hole center(s) and the hole diameter.
* Holes are circular. Elongated holes or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5-5.5-6-6.5-7-7.5-8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5-5.5-6-6.5-7-7.5-8-8.5-9-9.5-10-12 mm Ø,
Material thickness from 3 mm: 5-5.5-6-6.5-7-7.5-8-8.5-9-9.5-10-12-13-14-15-16-17-18 -19-20 mm Ø.
Hints:
Due to cutting with guillotine shears, both sides of the sheet have scratches. This is unavoidable, standard practice and does not constitute a reason for a complaint.
We recommend having the sheets deburred - you can select this inexpensive additional service in the drop-down menu on the right.
Material that has not been deburred has sharp edges. Please remember to wear suitable protective clothing and gloves!
Steel Sheet 12 mm
(Heavy plate, hot-rolled S235JR)
• Dimensions: selectable up to 3000 x 1500 mm (10 mm = 1 cm)
• Thickness: 12 mm (structural plate)
• Surface: smooth, tinderedt
• Alloy: S235JR, magnetic
• Weight per m² for thickness
12 mm: 96 kg
•
Cutting tolerance: ±2.0 mm
Structural Steel Plate 12 mm (with Mill Scale) – Order Cost-Effectively from the Specialist
Steel sheet with a thickness of 12 mm is ready for use in mechanical engineering, steel construction, and the entire construction sector. Due to its high own weight (weight per m² for 12 mm thickness: 96 kg), this structural plate is often used as a base and for example as sculpture stands, table supports, microphone stands, or as light/speaker stands in the construction of housings, sturdy covers, or as design elements in interior architecture.
The 12 mm steel sheet is well weldable by all common welding processes and, of course, magnetic. Thus, the steel plate is indispensable not only in construction and interior design but also finds versatile applications here:
• in mechanical engineering
• in shipbuilding
• bridge construction
• vehicle construction
• agriculture
• furniture manufacturing
• pipe and profile industry
• enamel, barrel, and construction industries
• for building housings, cabinets and much more
S235JR is a typical base steel for the entire construction sector and industry. Steel sheet / black sheet features very good weldability combined with good strength. Before welding, however, the mill scale must be removed from the corresponding areas of the structural plate or steel sheet 8 mm cuttings.
The name "black sheet" originates from the fact that it is hot-rolled at temperatures between 720 - 1260 °C. At this temperature, a dark oxide layer forms — the mill scale. Another name for black sheet is "mill-scaled sheet". The matt surface of 8 mm steel sheet with mill scale shimmers in different colours depending on the viewing angle (blue, violet, red).
Structural Steel Sheet 8 mm – Configure Dimensions, Check Price and Order Online
Order your 8 mm steel sheet custom-sized online here easily and without hassle. Enter the desired dimensions of the sheet cutting in the configurator and find out immediately what your plate costs. You buy conveniently at the push of a button. At Metallparadies, besides 12 mm steel sheet, you can of course also order all other common thicknesses as cuttings in any quantity.
You will receive our 12 mm hot-rolled steel sheet with mill scale.
Other available sheet thicknesses in the structural plate range are
3 mm,
4 mm,
5 mm,
6 mm,
8 mm,
10 mm,
12 mm,
15 mm and
20 mm.
Thinner sheets below 3 mm thickness (fine sheets) are available in the DC01 alloy in various thicknesses.
Both sheet types will quickly develop surface rust when exposed to air. For protection against corrosion, coatings such as paints, waxes, oils, powder coatings, or electroplating processes are necessary.
If you want to learn more about the different sheet thicknesses, we recommend our
>>Steel Sheet Thicknesses Knowledge Article<<.
How We Cut Your Sheets
Cutting method: Sheets up to and including 10 mm thickness are cut using our hydraulic plate shears. Sheets of 12 mm, 15 mm, and 20 mm thickness are laser cut by a partner company — this naturally increases delivery time.
Warping: Cutting with plate shears can cause smaller sheets to slightly twist (torsion). Particularly narrow strips may not lie completely flat on an absolutely level surface.
Laser-cut parts can also deform slightly due to heat input (thermal distortion). Warping cannot be prevented or corrected by us!
Scratches: Both sides of the sheet will have scratches from handling. Scratches can also be deep. Cutting with a plate shear can cause circular impressions from the shear's hold-down clamp.
Production marks are unavoidable, usual in trade, and therefore not a reason for complaint.
By the way, have you heard of "Baking Steel"?
Simply put: pizza stones are outdated, today we use 6 mm steel sheet! In our blog post
>>From Steel to Baking Steel – Make Your Bakes a Hit<< you will find everything you need to know about this trending topic.
On Request: Holes According to Your Sketch
Holes can also be drilled in your customised workpiece*.
Please select the number of holes in the menu. Shortly after your order confirmation, you will receive an
automatic email requesting a sketch, titled: "Holes for your order: AU ....., Order number: .....".
Please read the attached PDF document carefully!
Then simply reply to this email with your sketch. We must be able to clearly identify the
position of the hole centre(s) and the
hole diameter.
Without this sketch, your order cannot be started!
* Holes are circular only. Slots, countersinks or rectangular holes are not possible!
The possible
hole diameter depends on material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
On Request: Priority Processing
If things need to be done particularly quickly, we offer priority processing for an additional charge. That means:
If we receive your prepaid order
Monday to Thursday, it will be completed and shipped within 24 hours. In the shopping cart, the chargeable priority option must be selected for
all items; otherwise, the order will not be prioritised!
This service is not available for all items. If your order exceeds our material or personnel capacity, we will contact you immediately to find a joint solution. For further questions, please
contact us!
Unfinished material has sharp edges. Please remember to wear appropriate protective clothing and gloves!
We recommend having the sheets deburred — this inexpensive additional service can be selected in the dropdown menu on the right.