Steel flat iron S235JR
-
Dimensions: [Width x Height] 20x3mm, 20x4mm, 20x5mm, 25x3mm, 25x4mm, 25x5mm, 30x3mm, 30x4mm, 30x5mm, 30x10mm, 40x4mm, 40x5mm, 40x6mm, 40x10mm, 50x3mm, 50x4 mm, 50x5 mm, 50x6 mm, 50x10 mm, 60x5 mm, 60x6 mm, 60x10 mm, 80x6 mm, 80x8 mm, 80x10 mm, 80x12 mm, 80x15 mm, 80x20 mm, 100x8 mm, 100x10 mm, 100x12mm, 100x15 mm, 100x20 mm, 120x8 mm, 120x10 mm, 120x12 mm, 120x15 mm, 120x20 mm, 150x8 mm, 150x10 mm, 150x12 mm, 150x15 mm, 150x20 mm, 200x8 mm, 200x10 mm, 200x12 mm, 200x15 mm, 200x20 mm selectable on the right (10 mm = 1 cm)
- Length: selectable on the right in mm up to 3000 mm
- Tolerance: +/- 2 mm (length)
-
Shape tolerances according to EN 100 58, i.e. in width : up to 40 mm: ± 0.75 mm, up to 80 mm: ± 1.0 mm, up to 100 mm: ± 1.5 mm, up to 120 mm: ± 2.0 mm, over 120 mm: ± 2.5 mm. Thickness deviation: up to 20 mm: ± 0.5 mm, up to 40 mm: ± 1.0 mm, up to 80 mm: ± 1.5 mm.
-
Hot-rolled steel profile, not precision steel . Please note the product photo: edges are rather rounded .
- Alloy: S235JR
This flat steel made of structural steel can be used for all types of construction; it is easily weldable using all welding methods and, of course, is magnetic. Due to its low price and ease of processing, flat steel finds countless applications in mechanical engineering, industry, plant engineering, agriculture, architecture, for the construction of supporting structures, staircases, gate systems, or balconies; as crossbeams, stiffeners, gussets, fastening straps, anchor plates, and much more.
S235JR is a typical base steel for mechanical engineering or steel construction. The material is hot-rolled, thus exhibiting scale on the surface. To protect against corrosion, a surface coating in the form of paints, waxes, oils, powder coatings, or electroplating is required.
On request: Drilling according to sketch
We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!
* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
On request: hot-dip galvanized (+ approx. 14 working days delivery time!)
Please note: For hot-dip galvanizing, the workpiece, sheet or profile must be suspended from one or two hooks.
To do this, we need to drill one or two holes (ø 6 mm) close to the edge if there is no other way to hang it.
First, we cut your product from the raw material. Then, we perform any necessary or desired additional work (such as deburring, rounding, drilling, edging, and welding). The workpiece is then degreased and pickled before being placed in the zinc bath.
Therefore, hot-dip galvanized components are always labor-intensive custom-made products! Returns are not possible.
Due to these numerous preparatory steps by hand and the hot-dip galvanizing by an external partner, the delivery time increases by approximately 14 working days.
The suspension hooks or wires may leave visible marks on the galvanization.
Thank you for your understanding!
Note: Priority in combination with subsequent galvanizing is not possible!