Stainless steel sheet decor 5WL 1.5mm
- Dimensions: right selectable up to 2500 x 1250 mm (10 mm = 1 cm)
- Thickness: 1.5 mm
- Alloy: 1.4301
- non-magnetic
- Surface: pattern rolled, visible side with protective film
- The cut is always longitudinal, i.e. along the longer side
The 5WL stainless steel decor is a high-quality, textured rolled sheet with a striking and elegant 5WL surface (5-part wave line). This special structure combines functionality and design at the highest level and is frequently used in areas where both aesthetic appeal and mechanical strength are required.
Alloy 1.4301, also known as V2A for short, is the most widely used stainless chromium-nickel steel. Due to its high chemical resistance to water and diluted acids, this steel is in high demand in the food and beverage industries. It is not suitable for use in swimming pools. Contact with seawater should also be avoided, as chloride ions attack the material.
Due to their attractive appearance, these sheets find a wide variety of applications in interior design, for example, for cladding columns, as wall cladding, or as decorative trim. The hygienic, easy-care surface is valued in the food industry, in container construction, in the catering industry, in commercial kitchens, in counter construction, in sanitary facilities and public buildings with high visitor traffic, and especially in hospitals.
On request: Drilling according to sketch
We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!
* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
Notes: The visible side of the sheet is protected by a film. However, due to cutting with guillotine shears, the uncoated back of the sheet will exhibit scratches. This is unavoidable, standard, and therefore does not constitute grounds for complaint.
Thicker sheets and narrow strips will twist slightly during cutting, meaning they will twist or bend. The sheet will therefore not lie completely flat on a smooth surface. We cannot prevent or correct this!
We recommend having us deburr the sheets right away – you can select this inexpensive additional service from the dropdown menu on the right.
Non-deburred material has sharp edges. Please remember to wear appropriate protective clothing and gloves!
On request: Priority processing
If your order needs to be processed particularly quickly, we offer priority processing for an additional charge. This means: If
we receive your prepaid order Monday through Thursday , it will be completed and shipped within 24 hours. The priority option (subject to an additional charge) must be selected for all items in the shopping cart; otherwise, the order will not receive priority processing!
This service is not available for all items. If your order exceeds our material or personnel resources, we will contact you immediately to find a solution together. If you have any further questions, please feel free to contact us !