Stainless steel sheet 1.4301 K320
- Dimensions: right selectable up to 3000 x 1500 mm (10 mm = 1 cm)
- Alloy: 1.4301
- non-magnetic
- Surface: K320 sanded, visible side foiled
This ground stainless steel sheet is often used for decorative cladding in household appliances, as well as in kitchen and furniture construction. Thanks to its optimal weather resistance, it is also used outdoors as roof cladding, wall coverings, in facade construction, as drip protection, or splash guards. Many customers also use these sheets as edge protection or impact protection to protect door leaves from being kicked in. They are also used as heat-conducting sheets, radiation protection sheets, or reflectors for lighting installations.
Alloy 1.4301, also known as V2A for short, is the most widely used stainless chromium-nickel steel. Due to its high chemical resistance to water and diluted acids, this steel is in high demand in the food and beverage industries. Not for use in swimming pools. Contact with seawater should also be avoided, as chloride ions attack the material.
Thanks to their attractive appearance, these sheets find a wide variety of applications in interior design, for example, for cladding columns, as wall cladding, or as decorative strips. The hygienic, easy-care surface is valued in the food industry, container construction, catering, commercial kitchens, counter construction, sanitary facilities, and high-traffic public buildings, especially hospitals.
Our mirror-look and K320 sheets are always film-coated on the visible side. After installation, you can simply remove the protective film.
On request: Drilling according to sketch
We can drill up to 20 holes on your configured workpiece*.
Please select the number of holes from the menu. After completing your purchase, you will automatically receive an email from our inventory management system requesting a sketch (max. after 30 minutes). Simply reply to the email and send us a sketch showing the position of the hole center(s) and the hole diameter.
* Holes are circular. Slotted or rectangular holes are not possible!
Possible hole diameters for material thicknesses up to 1.25 mm: 5-5.5-6-6.5-7-7.5-8 mm Ø.
Notes: The visible side of the sheet is protected by a film. However, due to cutting with guillotine shears, the non-filmed back of the sheet will exhibit scratches. This is unavoidable, standard, and therefore does not constitute grounds for complaint. Thicker sheets and narrow strips will twist slightly during cutting, meaning they will twist or bend. The sheet will therefore not lie completely flat on a smooth surface. We cannot prevent or correct this!
We recommend having the sheets deburred by us at the same time – you can select this inexpensive additional service from the dropdown menu on the right.
Non-deburred material has sharp edges. Please remember to wear suitable protective clothing and gloves in this case!
On request: Priority processing
If your order needs to be processed particularly quickly, we offer priority processing for an additional charge. This means: If
we receive your prepaid order Monday through Thursday , it will be completed and shipped within 24 hours. The priority option (subject to an additional charge) must be selected for all items in the shopping cart; otherwise, the order will not receive priority processing!
This service is not available for all items. If your order exceeds our material or personnel resources, we will contact you immediately to find a solution together. If you have any further questions, please feel free to contact us !