Are you looking for protection for broken or damaged corners, edges and walls?
We have the stable, durable, and timeless solution for your heavily used (corner) areas!
-
All our stainless steel L-brackets are bent to size - please note our information for made-to-measure items !
- Alloy: 1.4301 (bright rolled / K240), 1.4016 (mirror-like, MAGNETIC)
- all dimensions are internal dimensions in mm (10 mm = 1 cm)
- The edges are deburred - less risk of injury during assembly!
Whether in public buildings, retail, industry, hospitals and clinics, restaurants, or even private homes, damaged corners, edges, and walls are a nuisance, whether indoors or outdoors! Sturdy edge protection is essential, as well as being as timeless, decorative, and easy to maintain as possible.
Stainless steel angle brackets – versatile
Our in-house manufactured stainless steel L-profiles are the perfect edge protectors and are also versatile in other ways!
Our stainless steel profiles, corner strips, rails, or angles are used for a variety of purposes, and not only as edge protectors. Their geometry alone makes L-profiles extremely stable. The material (stainless steel, bright rolled, K240 ground, or mirror-like) does the rest – it is robust and not only looks elegant, but also makes the profiles corrosion-resistant and hard-wearing. They are also ideal for edging worktops, as edge protectors for concrete structures, glass structures, or Plexiglas, and even as edge protectors for tiles and wooden stair treads, and they serve a great purpose.
Stainless steel angles, or metal angles in general, are also often referred to as corner brackets, angle profiles, corner strips, or corner rails, edge protection profiles, angle rails, or angle strips, as strip profiles, as corner mirrors, corner protection strips, or corner protection angles, or even as step protectors, and are therefore used in a variety of ways.
Here is a small selection of possible applications for our stainless steel L-profiles:
- Edge protection of walls, corners, edges and walls indoors and outdoors
- Edge protection of concrete structures, glass structures or plexiglass
- Edge protection of tiles or stairs
- Edge protection for passageways or hatches
- Stair nosing profile, step strip
- Impact protection or rebound protection at garage entrances or pillars
- Edging of worktops, window sills and reveals
- End strip (cover strip for roofs and facades, skirting board, baseboard, end angle / end strip, and much more)
- Cable duct or cable cover
- Guide rail or slide-in rail
- decorative strip
- and much more
These L-profiles, manufactured in-house, are ideal for edge protection or for edging wooden countertops or stair treads. They're also ideal for use as cable ducts, cladding, guide or insert strips, decorative strips, or cover strips for outdoor use, roofs, and facades.
Notes on the surface designs and further information:
-
Walzblank: Dieses Blech ist nicht foliert und die Oberfläche nicht weiter veredelt. Also so wie es aus der Walze kommt - gräulich, leicht milchig glänzend. Beide Seiten werden Kratzer/Streifen vom Zuschnitt und vom Kanten aufweisen. Das Blech kann außerdem Flecken oder eine Schrift/Stempel aufweisen. Für hohe optische Ansprüche eher nicht geeignet!
-
Spiegelähnlich: Ähnelt einem echten Glasspiegel, erreicht aber nicht dessen Brillanz - Die Sichtseite ist durch eine Folie geschützt und die andere Seite kann Kratzer vom Zuschnitt und vom Kanten, Flecken oder eine Schrift/Stempel aufweisen.
-
K240: Feine parallele Riefen, längs geschliffen mit einem Schleifmittel der Körnung 240 - Die Sichtseite ist durch eine Folie geschützt und die andere Seite kann Kratzer vom Zuschnitt und vom Kanten, Flecken oder eine Schrift/Stempel aufweisen.
-
Auf Wunsch: Kantung 3-fach! Im Gegensatz zum normalen L-Profil werden hier die Schenkelkanten zusätzlich noch ein wenig nach innen gekantet (vgl. Bild im Menü). So ergibt sich ein deutlich besserer Anschluss an die Wand.
Wichtige Hinweise für Konfiguratorartikel:
- Dieser Artikel wird nach Ihren Angaben angefertigt. Achten Sie bitte sorgfältig auf Ihre Maßangaben, denn Konfiguratorartikel sind vom Umtausch ausgeschlossen.
- Geben Sie bei Kantungen alle Maße als Innenmaße in Millimeter an. Die Außenmaße variieren je nach gewählter Materialstärke und dem dafür notwendigen Biegeradius. Das Außenmaß erhöht sich um mindestens +1,5 mm bei 1 mm Materialstärke, etwa + 2,5 mm bei 1,5 mm, und 3,5 mm bei 2 mm Blechdicke. (Ohne Gewähr)
- Die Sichtseite des Bleches ist durch eine Folie geschützt. Durch den Zuschnitt auf einer Tafelschere und die Fertigung per Hand wird jedoch die nicht folierte Rückseite des Bleches Kratzer aufweisen (bei walzblankem Blech: beide Seiten). Diese beeinträchtigen nicht die Funktion des Artikels und stellen daher auch keinen Reklamationsgrund dar.
Auf Anfrage können wir auch Profile aus 2,5 bis 4 mm starkem Material anfertigen!
Auf Wunsch: Bohrungen gemäß Skizze
We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!
* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
New: Enter either internal or external dimensions!
For our self-bent products, all dimensions are specified as internal dimensions in millimeters as standard . We can easily and reliably maintain your desired product dimensions within our specified tolerances.
However, you may require a specific external dimension for your application. Therefore, as an exception, we offer the option of specifying dimensions as external dimensions . This service is subject to an additional charge!
This is because producing bent parts with specific external dimensions on our machines is significantly more complex. It requires considerable experience and, in many cases, a series of tests with sample pieces.
Please understand the surcharge. Should the results of our tests be unsatisfactory, we will unfortunately have to reject your order – however, this will not incur any costs for you.