-
Variants (diameter in mm) : 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 30 mm, 32 mm, 35 mm, 36 mm, 40 mm, 42 mm, 45 mm, 48 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80 mm, 85 mm, 90 mm, 95 mm, 100 mm. (10 mm = 1 cm)
- Length: selectable on the right up to 3000 mm ( = 300 cm = 3 meters )
- Tolerance: +/- 2 mm (length)
-
Form tolerances according to EN 10060, ie for diameters : up to 14 mm: ± 0.4 mm, up to 25 mm: ± 0.5 mm, up to 35 mm: ± 0.6 mm, up to 50 mm: ± 0.8 mm, up to 80 mm: ± 1 mm, up to 100 mm: ±1.3 mm.
-
Hot rolled, not precision steel .
- Alloy: S235JR
This round, solid structural steel material can be used for all constructions; it is easily weldable using all processes and, of course, is magnetic.
Due to its low price and ease of processing, round steel bars have countless applications. They are frequently used for the construction of fences, gates, window grilles, cellar grilles, gratings, or balconies in architecture; as bars, gates, or cattle grids in agriculture or forestry; for reinforcements or as anchors in construction; as crossbeams, stiffeners, fastening eyes, and much more in mechanical engineering and industry. They can also be used to a limited extent as a shaft.
S235JR is a typical base steel for mechanical engineering or steel construction. The material is hot-rolled, and therefore has scale on its surface. To protect against corrosion, a surface coating in the form of paint, wax, oil, powder coating, or electroplating is required.
On request: miter cut
We can also miter cut your profiles right away. Our band saws produce significantly straighter edges than subsequent cuts with an angle grinder. This saves you a lot of time when working with welded structures!
Angle accuracy to approximately ± 1 degree, so some reworking may be necessary for exact designs. The length always refers to the longest edge!
Note: The cut edges are not entirely burr-free. We recommend having the tubes deburred by us at the same time – you can select this inexpensive additional service from the dropdown menu on the right.
Non-deburred material has sharp edges. Please remember to wear appropriate protective clothing and gloves!
On request: hot-dip galvanized (+ approx. 14 working days delivery time!)
Please note: For hot-dip galvanizing, the workpiece, sheet or profile must be suspended from one or two hooks.
To do this, we need to drill one or two holes (ø 6 mm) close to the edge if there is no other way to hang it.
First, we cut your product from the raw material. Then, we perform any necessary or desired additional work (such as deburring, rounding, drilling, edging, and welding). The workpiece is then degreased and pickled before being placed in the zinc bath.
Therefore, hot-dip galvanized components are always labor-intensive custom-made products! Returns are not possible.
Due to these numerous preparatory steps by hand and the hot-dip galvanizing by an external partner, the delivery time increases by approximately 14 working days.
The suspension hooks or wires may leave visible marks on the galvanization.
Thank you for your understanding!
On request: Priority processing
If you need it particularly quickly, we offer priority processing for an additional charge. This means: If
we receive your prepaid order Monday through Thursday , it will be completed and shipped within 24 hours. The priority option (subject to an additional charge) must be selected for all items in the shopping cart; otherwise, the order will not receive priority processing! This service is not available for all items. If your order exceeds our material or personnel resources, we will contact you immediately to find a solution together. Please feel free to contact us
if you have any further questions !
Note: Priority in combination with subsequent galvanizing is not possible!