Titanium Zinc Z Profile Custom Made – Zinc Z Section Cut to Size
Our titanium zinc Z profile custom made is a durable metal profile for roofing, cladding, architectural details and custom fabrication.
Also known as a zinc Z section or titanium zinc Z profile, this profile is ideal for stepped transitions, cover details, offsets and clean visible metal finishes.
Each titanium zinc Z profile is manufactured according to your required dimensions, helping you achieve a precise fit for your project.
Titanium zinc is valued for its excellent formability, long-lasting surface and natural patina, making it suitable for functional and decorative applications.
What is a titanium zinc Z profile?
A titanium zinc Z profile is a formed metal profile with a Z-shaped cross section.
This shape is especially useful when two different surface levels need to be connected, covered or visually separated with a clean metal finish.
The material is commonly described as zinc sheet metal or EN988 titanium zinc.
It develops a natural surface character over time and is widely used for roofing, facade details, interior design and custom sheet metal work.
Custom made to your size
Your zinc Z section is custom made to your selected dimensions.
Choose the profile dimensions, offset and length according to your project requirements for a clean and accurate fit.
Material & surface
-
Titanium zinc – durable, formable and long-lasting
-
Z profile shape – ideal for transitions, covers, offsets and trim details
-
Zinc sheet metal surface – develops a natural patina over time
-
Custom made – manufactured according to your selected dimensions
-
EN988 material logic – suitable for architectural and fabrication applications
Applications
- Roofing and flashing details
- Facade and cladding transitions
- Stepped transitions between different surfaces
- Decorative trim and cover profiles
- Interior design and visible metalwork
- Fabrication and custom workshop projects
Key benefits
- Custom made for precise fit
- Durable titanium zinc material
- Clean Z-shaped profile for professional detailing
- Excellent formability and workability
- Natural zinc appearance with patina development
- Suitable for functional and decorative use
Why choose titanium zinc Z profiles?
Titanium zinc Z profiles are ideal when offsets, stepped edges or transitions need to be finished cleanly.
The Z-shaped form allows different surface levels to be connected or covered in a controlled way, while the zinc surface provides a natural, high-quality appearance that develops over time.
This makes the profile a strong choice for roofing details, cladding transitions, architectural metalwork and decorative applications where both appearance and long-term performance matter.
Conclusion
With our custom-made titanium zinc Z profile, you receive a precise, durable and visually clean solution for decorative and technical applications.
Perfect for projects where custom dimensions, natural zinc appearance and professional profile finishing are required.
On request: Drilling according to sketch
We can also add drill holes to your configured workpiece*. Please select the number of drill holes in the menu. Shortly after completing your purchase, we will automatically send you an email requesting a sketch. Subject: "Drill holes for your order: AU …., Order number: ....."
Please make sure to read the PDF document attached to the email!
Simply reply to the email with your sketch attached. We must be able to clearly identify the position of the hole centre(s) and the hole diameter. Without this sketch, your order cannot be processed.
* Drill holes are always circular. Slotted holes, countersinks or rectangular cut-outs are not possible!
The possible hole diameter depends on the material thickness:
- Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø
- Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø
- Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø
How we cut your sheets
Cutting method: Sheets up to and including 10 mm thickness are cut on our hydraulic guillotine shears. Sheets in 12 mm, 15 mm and 20 mm thickness are laser cut by a partner company, which naturally increases delivery time.
Warping: Due to the cutting process with guillotine shears, smaller sheets may slightly twist or warp. Narrow strips in particular may not lie perfectly flat on an absolutely level surface. The narrower the strip and the thicker the sheet, the stronger this effect becomes. As an alternative, our flat bar products may be more suitable for certain applications.
Even laser-cut sheets may slightly deform due to heat input during the cutting process. Warping cannot be prevented or corrected.
Scratches: Due to general handling and processing, both sides of the sheet may show scratches, including deeper marks. When cut on guillotine shears, circular pressure marks from the sheet hold-down device may also appear.
Production marks are unavoidable, industry standard and therefore do not constitute grounds for complaint.
On request: Priority processing
If you need your order particularly quickly, we offer priority processing for an additional charge.
If we receive your prepaid order from Monday to Thursday, it will be completed and dispatched within 24 hours.
The paid priority option must be selected for all items in the shopping cart, otherwise the order cannot be prioritised.
This service is not available for all products. If your order exceeds our material or production capacities, we will contact you immediately to find a suitable solution together.
If you have any further questions, please feel free to contact us.