- Z-profile made of smooth steel sheet oiled, smooth sheet galvanised, bent to size
- Alloy: DC01, S235JR or DX51 D+Z
- Material and edge angle selectable on the right!
- Length and dimensions selectable on the right
-
all dimensions are internal dimensions in mm (10 mm = 1 cm)
- Edges deburred - less risk of injury during assembly!
Choose from the following materials:
-
DC01: Raw steel smooth sheet, lightly oiled
-
DX51 D+Z: Galvanized steel sheet
These L-profiles, manufactured in-house, are ideal for edge protection or for edging wooden countertops or stair treads. They're also ideal for use as cable ducts, cladding, guide or insertion strips, contact protection, decorative strips, cover strips, repair panels, or for stiffening steel structures.
On request: Drilling according to sketch
We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!
* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
New: Enter either internal or external dimensions!
For our self-bent products, all dimensions are specified as internal dimensions in millimeters as standard . We can easily and reliably adhere to your desired product dimensions using our specified tolerances.
However, you may require a specific external dimension for your application. Therefore, as an exception, we offer the option of specifying dimensions as external dimensions . This service is subject to an additional charge!
This is because producing bent parts with specific external dimensions on our machines is significantly more complex. It requires considerable experience and, in many cases, a series of tests with sample pieces.
Please understand the surcharge. Should the results of our tests be unsatisfactory, we will unfortunately have to reject your order – but this will not incur any costs for you.
Notes: Due to the cutting and bending process, both sides of the sheet will have scratches.