Are you looking for a worktop cover without a wall connection?
... then our stainless steel covers are the simpler alternative to our "normal" worktop cover Product features
-
Worktop cover without wall connection, therefore no leg A
- Material thickness selectable: 0.8 mm, 1.0 mm, 1.5 mm or 2.0 mm
-
For all worktops, not just standard thicknesses!
-
Possible depth of the worktop (= leg B ): 300 mm to 900 mm (10 mm = 1 cm)
-
Thickness of the worktop (= leg C ) up to 100 mm possible
- The edge of the worktop is enclosed from below with a 15 mm wide border
- On request with holes for fittings or cutouts for sinks or hobs
- Up to 3 meters long in one piece
- Stainless steel 1.4301 – hygienic, rust-proof, heat-resistant, easy to clean
- K240 grinding in longitudinal direction
- Material foiled on the visible side (= sanded side)
Whether you want to use this stainless steel worktop as a restaurant or kitchen countertop, as a work surface in the medical or microbiological field, or for private use indoors and outdoors, it's a lightweight, cost-effective, and durable alternative to a new tabletop. Whether it's for a hobby table as a heat-resistant base for soldering or as an electrically and thermally conductive base for welding, you can have a custom-made and robust base made here. The worktop cover also makes a great new base for an old planting table.
Using our configurator, you can easily configure your custom-made stainless steel worktop or stainless steel surface and order it at the touch of a button. Start by entering the dimensions of the worktop using the input mask.
We are also happy to manufacture worktops with cutouts (recesses) for things like sinks, hotplates, waste bins, sockets or fittings . To do this, click the "Create cutouts" button - a window with our graphical cutout configurator* will open. Here you can create all rectangular or circular cutouts and notches and immediately receive a preview of what your new worktop will look like.
* Desktop computer or tablet in landscape format / landscape mode recommended! If a warning message appears when opening the cutout configurator window, you can submit a quote request . You are also welcome to send a sketch.
All of our stainless steel worktops are available with or without raised or lowered edges. Please also note our information on made-to-measure items !
Please note that the input fields "Leg A in mm:" and "Angle A in degrees:" have no meaning here and will not be taken into account!
Important information for configurator items:
- Worktop covers with cutouts and holes can take up to 4 weeks!
-
This item will be custom-made to your specifications. Please pay careful attention to your measurements, as custom-made items are non-returnable .
-
For bends, specify all dimensions as internal dimensions in millimeters. The external dimensions vary depending on the selected material thickness and the required bending radius. The external dimension increases by at least +1.5 mm for 1 mm material thickness, approximately +2.5 mm for 1.5 mm, and 3.5 mm for 2 mm sheet thickness. (No guarantee)
- The visible side of the sheet is protected by a film. However, due to cutting with guillotine shears and hand-crafting, the unfilmed back of the sheet will exhibit scratches. These do not affect the function of the item and therefore do not constitute grounds for complaint.