Aluminium hat profile 2.5 mm

SKU: AR1038
Category: Custom made aluminium hat profile

Deburr cut edges
Dimension designations
Length in mmmin 50 mm / max 3000 mm: Length in mmmin 50 mm / max 3000 mm
Leg A in mmmin 30 mm / max 50 mm: Leg A in mmmin 30 mm / max 50 mm
Leg B in mmmin 40 mm / max 1250 mm: Leg B in mmmin 40 mm / max 1250 mm
Leg C in mmmin 110 mm / max 300 mm: Leg C in mmmin 110 mm / max 300 mm
Leg D in mmmin 40 mm / max 70 mm: Leg D in mmmin 40 mm / max 70 mm
Leg E in mmmin 30 mm / max 50 mm: Leg E in mmmin 30 mm / max 50 mm
Additional drill holes according to sketch: Additional drill holes according to sketch

80,33 €

80,33 € per 1 m²

incl. 19% VAT , plus

Weight: 6.75 kg

Available immediately
Delivery time: 3 - 4 Workdays (DE - int. shipments may differ)

Check and confirm your measurements here:

Length : 0 mm = 0,0 centimeter = 0,0 meter
Leg A : 0 mm = 0,0 centimeter = 0,0 meter
Leg B : 0 mm = 0,0 centimeter = 0,0 meter
Leg C : 0 mm = 0,0 centimeter = 0,0 meter
Leg D : 0 mm = 0,0 centimeter = 0,0 meter
Leg E : 0 mm = 0,0 centimeter = 0,0 meter

Please confirm your entries here

This item has variations. Please select the requested variation.

Description

Hat profile made of smooth aluminum sheet, bent to size
Alloy: AlMg3
Design: natural aluminum without foil
Length and dimensions selectable on the right
all dimensions are internal dimensions in mm (10 mm = 1 cm)
Width C must be significantly larger than width B or D
Aluminum is a soft metal that scratches easily during processing! Please examine the product images carefully and note our instructions for custom-made items !

On request: Drilling according to sketch

We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!

* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!

The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.

Important information for configurator items:

This item will be custom-made to your specifications. Please pay careful attention to your measurements, as custom-made items are non-returnable .
For bends, specify all dimensions as internal dimensions in millimeters.
The outer dimensions vary depending on the selected material thickness and the required bending radius. The outer dimensions increase by approximately three times the sheet thickness. (No guarantee)
Due to the handcrafted nature of the product, scratches on both sides are unavoidable! These do not affect the functionality of the item.
From a thickness of 2.5 mm, cracks can occur in the material due to edging!

If you are unable to configure your desired profile using the configurator, please feel free to send us an inquiry anyway - perhaps we can find a solution.

New: Enter either internal or external dimensions!

For our self-bent products, all dimensions are specified as internal dimensions in millimeters as standard . We can easily and reliably adhere to your desired product dimensions using our specified tolerances.
However, you may require a specific external dimension for your application. Therefore, as an exception, we offer the option of specifying dimensions as external dimensions . This service is subject to an additional charge!
This is because producing bent parts with specific external dimensions on our machines is significantly more complex. It requires considerable experience and, in many cases, a series of tests with sample pieces.
Please understand the surcharge. Should the results of our tests be unsatisfactory, we will unfortunately have to reject your order – but this will not incur any costs for you.

	Fair shipping costs Transparent according to weight and pack size.
	Individual cuts You determine all sizes and measurements!
	Price-performance: Top-notch! Best quality & best service - no matter how much you buy!
	Purchase without risk 14 day right of withdrawal (not for made-to-measure items)
	Safe shopping Protection of your data through SSL encryption
	Opening hours & consultation: Mon to Fri 6:00 a.m. - 2:30 p.m. Collection by appointment only!