U-profile made of aluminium, double folded
Alloy: AlMg3
Material thickness and edge angle selectable on the right!
Length (up to 2500 mm) and dimensions can be selected on the right. Attention: Leg B must always be at least 5 mm longer than the shortest other leg, otherwise production is not possible!
All dimensions are internal dimensions in mm (10 mm = 1 cm)
These U-profiles from our own production are ideal as edge protection or for edging wooden worktops or steps. They can also be used as cable ducts, panelling, guide or slide-in strips, cover strips for outdoor areas, roofs and facades.
Please consider the choice of material: Sheets in ‘Natural aluminium AlMg3’ are not laminated. Due to the cutting and edging process, both sides of the sheet will therefore show scratches/stripes. As aluminium is a soft metal, scratches can also be deep. Profiles in ‘natural aluminium AlMg3’ are only intended for technical applications. The focus is on the material properties, not the appearance!
The aluminium sheets in the RAL colours anthracite and traffic white are protected with a protective film on the painted visible side. Scratches will only occur on the bare reverse side.
For particularly decorative applications in interiors or living areas, we recommend the K240 stainless steel version: customised stainless steel U-profile
Note on configuration: For production reasons, the bar (leg B) must be at least 5 millimetres longer than the shortest other leg. Please take this into account when making your entry.
On request: Drill holes as per sketch
We can also drill holes in your configured workpiece*.
Please select the number of holes in the menu. Shortly after completing the purchase, we will automatically send an e-mail requesting a sketch, subject: ‘Drill holes for your order: AU ....., order number: .....’.
Be sure to read the PDF document attached to the e-mail!
Then simply send us your sketch in response to this e-mail. We must be able to clearly identify the position of the borehole centre(s) and the borehole diameter.
Your order cannot be started without this sketch!
* Boreholes are circular. Oblong holes, countersinks or rectangular holes are not possible!
The possible hole diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
New: Enter either internal or external dimensions!
For our self-folded products, all dimensions are specified as internal dimensions in millimetres as standard. We can easily and reliably fulfil your desired product dimensions with our specified tolerances.
However, you may need a specific external dimension for your application. As an exception, we therefore offer you the option of specifying dimensions as external dimensions. This service is subject to a surcharge!
The reason for this is that the production of flashings with specific external dimensions on our machines is considerably more complex. It requires a lot of experience and in many cases a series of tests with test pieces.
We therefore ask for your understanding for the surcharge. If the results of our tests are not satisfactory, we will unfortunately have to reject your order - but you will not incur any costs.