- C-profile made of aluminum, four-fold folded
- Alloy: AlMg3
- Length (up to 3000 mm = 300 cm = 3 meters) and leg dimensions selectable on the right
-
all dimensions are internal dimensions in mm (10 mm = 1 cm)
These C-profiles, manufactured in-house, are ideal for edge protection or for edging wooden countertops or stair treads. They're also ideal for use as cable ducts, cladding, guide or insertion strips, decorative strips, or cover strips for exterior applications, roofs, and facades.
Please note the following when selecting the material:
- Sheets in "Natural Aluminum AlMg3" are not foil-coated. Due to the cutting and bending process, both sides of the sheet will therefore have scratches/streaks. Since aluminum is a soft metal, scratches can be deep. Profiles in "Natural Aluminum AlMg3" are intended for technical applications only. The focus is on the material properties, not the appearance!
Note on configuration: The opening between legs A and E must be large enough for production. If this is not the case, we will unfortunately have to reject your order. Please keep this in mind when submitting your order and ask if in doubt.
On request: Drilling according to sketch
We can also drill holes into your configured workpiece*.
Please select the number of holes from the menu. Shortly after your purchase is completed, we will automatically send an email requesting a sketch. Subject: "Drill holes for your order: AU ....., Order number: .....".
Be sure to read the PDF document attached to the email!
Then simply send us your sketch as a reply to this email. We need to be able to clearly identify the position of the hole center(s) and the hole diameter .
Without this sketch, your order cannot be started!
* Holes are circular. Slotted holes, countersinks, or rectangular holes are not possible!
The possible bore diameter depends on the material thickness:
Material thickness up to 1.25 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm Ø,
Material thickness from 1.5 to 2.5 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm Ø,
Material thickness from 3 mm: 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm Ø.
New: Enter either internal or external dimensions!
For our self-bent products, all dimensions are specified as internal dimensions in millimeters as standard . We can easily and reliably adhere to your desired product dimensions using our specified tolerances.
However, you may require a specific external dimension for your application. Therefore, as an exception, we offer the option of specifying dimensions as external dimensions . This service is subject to an additional charge!
This is because producing bent parts with specific external dimensions on our machines is significantly more complex. It requires considerable experience and, in many cases, a series of tests with sample pieces.
Please understand the surcharge. Should the results of our tests be unsatisfactory, we will unfortunately have to reject your order – but this will not incur any costs for you.